Compare vs Pro Players
Powered by edpicalculator.net
Calculating your Fortnite eDPI takes one step: multiply your mouse DPI by your in-game sensitivity percentage. This guide covers the exact formula, real pro settings from 2026 and practical advice on finding a sensitivity that works for both building and aiming.
The Fortnite eDPI Formula
eDPI = Mouse DPI × Sensitivity (as a decimal)
Fortnite displays sensitivity as a percentage (e.g. 7%), so you convert it first:
eDPI = Mouse DPI × (Sensitivity% ÷ 100)
Example: 800 DPI × 0.05 (5%) = 40 eDPI
Fortnite’s sensitivity scale runs from 1 to 100. The default is 10. Most pros at 800 DPI use between 5 and 9.
Step by Step Calculation
Step 1. Open Fortnite and go to Settings → Mouse. Note your X Sensitivity percentage.
Step 2. Open your mouse software and check your current DPI. Common values are 400, 800 and 1600.
Step 3. Divide your sensitivity by 100 to convert the percentage to a decimal. If your sensitivity is 6.7%, the decimal is 0.067.
Step 4. Multiply DPI by the decimal. 800 × 0.067 = 53.6 eDPI, close to the 2026 pro median of about 54.
Fortnite Pro Settings 2026
Settings listed on prosettings.net in October 2026. Pros change their settings often:
| Player | DPI | X Sensitivity | eDPI | cm/360 |
|---|---|---|---|---|
| Bugha | 800 | 6.4% | 51.2 | — |
| Cooper | 1600 | 2.9% | 46.4 | — |
| Peterbot | 800 | 6.8% | 54.4 | — |
| Clix | 800 | 8.7% | 69.6 | — |
| Mongraal | 1600 | 3.2% | 51.2 | — |
| Veno | 800 | 6.3% | 50.4 | — |
| EpikWhale | 800 | 7.0% | 56.0 | — |
| Queasy | 800 | 6.6% | 52.8 | — |
Across the roughly 280 Fortnite pros listed on prosettings.net in October 2026, the median eDPI is about 54 and the average is about 62. Most use 800 DPI with 5% to 8% sensitivity, or 1600 DPI with about half that.
What eDPI Range Should You Use
| eDPI Range | Playstyle | Notes |
|---|---|---|
| Under 40 | Very low | Maximum precision, struggles with fast building edits |
| 40 to 60 | Low competitive | Most pros sit here, the 2026 median is about 54 |
| 60 to 80 | Mid competitive | Good balance, Clix (69.6) sits here |
| 80 to 100 | High | Fast edits, harder to aim at range |
| Above 100 | Very high | Not common in competitive play |
Note: some guides quote Fortnite eDPI values in the hundreds. Those numbers use a different scale and cannot be compared with this calculator. Using DPI × decimal sensitivity, most pro eDPI values in 2026 sit between 40 and 70.
Fortnite Sensitivity Percentage vs Other Games
Fortnite uses a unique percentage system that makes eDPI numbers look very different from CS2 or Valorant:
| Game | Sensitivity Scale | Pro Avg eDPI | Yaw Value |
|---|---|---|---|
| Fortnite | 1 to 100 (%) | About 54 (median) | 0.5556 |
| CS2 | Decimal | About 830 | 0.022 |
| Valorant | Decimal | About 250 | 0.07 |
| Apex Legends | Decimal | About 1,100 | 0.022 |
Never compare Fortnite eDPI numbers to other games directly. Use cm/360 when switching between games. Fortnite’s yaw value is 0.5556, which is why the eDPI numbers look so different from CS2.
Build Mode vs Zero Build Sensitivity
Many players use the same sensitivity for Build Mode and Zero Build, but the optimal ranges differ slightly:
- Build Mode: most pros sit between about 45 and 65 eDPI. Building mechanics require turning speed during box fights.
- Zero Build: many players go slightly lower than in Build Mode. No building means pure aim precision matters more, so a lower sensitivity can help.
- Fortnite OG: the simpler building in OG seasons leads some players to lower their sensitivity a little. Change it in small steps.
Important Fortnite Sensitivity Settings
| Setting | Recommended Value | Why |
|---|---|---|
| X Sensitivity | Match your target eDPI | Horizontal crosshair speed |
| Y Sensitivity | Same as X | Consistent vertical tracking |
| Targeting Sensitivity | 65 to 75% | Slows ADS for better accuracy |
| Scope Sensitivity | 65 to 75% | Steadier sniper shots |
| Edit Hold Time | 0.100 to 0.130 | Standard competitive value |
| Confirm Edit on Release | On | Used by most pros, saves one input per edit |
Performance Settings That Affect How Sensitivity Feels
Two settings have a significant effect on how your sensitivity actually feels even if the number stays the same:
Frame Rate. Higher FPS makes your mouse input feel more responsive at the same eDPI. Pros use Performance Mode in Fortnite and set frame rate to Unlimited or one step above their monitor refresh rate. Lower FPS makes sensitivity feel sluggish even if the eDPI number is correct.
Window Mode. Always use Fullscreen, not Windowed or Windowed Fullscreen. Windowed modes add measurable input lag that makes sensitivity feel inconsistent even when the DPI and sensitivity values are unchanged.
How to Find Your eDPI Without Changing Too Much
Start at about 54 eDPI (800 DPI × 6.8% sensitivity), close to the 2026 pro median. Play 10 matches in Build Mode and note whether you consistently overshoot or undershoot targets at mid range. If you overshoot, lower by 5% of your current value. If you undershoot, raise by 5%. Make one change at a time and give yourself at least one week before changing again. Muscle memory in Fortnite builds through repetition, not through finding a perfect number immediately.
Frequently Asked Questions
How do you calculate eDPI in Fortnite?
Multiply your mouse DPI by your in-game sensitivity converted to a decimal. If your sensitivity is 5% and your DPI is 800, divide 5 by 100 to get 0.05, then multiply: 800 × 0.05 = 40 eDPI. Use the calculator at the top of this page to do this instantly.
What eDPI do Fortnite pros use in 2026?
In October 2026, prosettings.net listed a median of about 54 eDPI across roughly 280 Fortnite pros. Peterbot uses 800 DPI × 6.8% = 54.4 eDPI, Bugha uses 800 DPI × 6.4% = 51.2 eDPI, and Clix uses 800 DPI × 8.7% = 69.6 eDPI. Most pros sit between about 45 and 70 eDPI.
Why does my Fortnite eDPI look different from CS2?
Fortnite uses a percentage sensitivity system with a yaw value of 0.5556, while CS2 uses a decimal system with a yaw of 0.022. The numbers are on completely different scales. A Fortnite eDPI of 50 does not mean the same physical mouse movement as 50 eDPI in CS2. Use cm/360 to compare across games.
Should X and Y sensitivity be the same in Fortnite?
Yes for virtually all players. Matching X and Y sensitivity ensures your crosshair tracks at the same speed horizontally and vertically, which is essential for consistent aim. Some players historically used different X and Y values but current FNCS pros almost universally match them.
Does Confirm Edit on Release affect sensitivity?
It does not change sensitivity but it does change how fast your edits register, which affects the rhythm of your building and editing. Turning it on means your edit confirms when you release the mouse button rather than requiring a second click, saving one input per edit. Most competitive players keep this setting on.